How many cartons fit in a 20ft, 40ft or high cube

Container Loading Calculator

Enter one carton size to see how many fit in each container, how to stack them, and whether space or weight runs out first. Add the number of cartons you are shipping to see how many containers they need.

Units
Your carton

Filled with an example carton. Replace the numbers with yours.

20ft standard—
40ft standard—
40ft high cube—

How to load it

Main block Turned to fill a gap

How the number is built

Container sizes

ContainerInside, L × W × HDoor, W × HVolumeMax payload
20ft standard 5,896 × 2,350 × 2,393 mm232.1 × 92.5 × 94.2 in 2,350 × 2,274 mm 33.2 m³1,171 ft³ 28,200 kg62,170 lb
40ft standard 12,032 × 2,350 × 2,393 mm473.7 × 92.5 × 94.2 in 2,340 × 2,274 mm 67.7 m³2,389 ft³ 28,800 kg63,493 lb
40ft high cube 12,032 × 2,350 × 2,697 mm473.7 × 92.5 × 106.2 in 2,340 × 2,577 mm 76.3 m³2,693 ft³ 28,620 kg63,096 lb

Inside sizes, with the height to the load line, from Maersk's equipment specifications. Containers from other lines differ by a few centimetres and a few hundred kilograms.

How the calculator fills a container

First it tries every way the carton can stand and keeps the one that fits most cartons stacked the same way: the inside length, width and height each divided by the carton's, rounded down. Then it fills the space that leaves at the doors, along the side wall and under the roof with cartons turned whichever way fits most there. It also tries the main block a few rows shorter, in case that leaves room for more turned cartons. Every block is a plain stack, so loaders can follow the drawing.

The count assumes cartons exactly as measured and a container filled to the last centimetre. Real cartons bulge and loaders need a little room, so treat it as the most that fits, and confirm a tight load with your forwarder before you book.

Upright or on their side

A corrugated carton is strongest standing upright, and many are marked "this side up", so the calculator keeps cartons upright unless you untick that option. Laying cartons on their side sometimes fits more; the calculator says how many, so you can decide whether the goods can take it.

When weight is the limit

Each container has a maximum payload, listed in the table. Heavy goods reach it before the container is full, so the calculator divides the payload by the carton's weight and says when weight, not space, is the limit. Road limits at either end are often lower than the payload: ask your forwarder before loading heavy goods.

Planning the volume and the freight bill? The CBM calculator adds up a shipment of several carton sizes, and the chargeable weight calculator shows what air freight, express and a shared container charge for.

New tools by email

Get the next tool before peak season

One email when a new calculator or guide goes live, and early access to Pro: every SKU at once, Shopify sync and ready-to-send purchase orders.

We use your email only to tell you about new tools and Pro. Reply to any email to be removed. Privacy notice

Questions importers ask

How many cartons fit in a 20ft container?

It depends on the carton. Divide each inside dimension by the carton's and round down: cartons of 60 × 40 × 50 cm fit 9 along a 20ft container (5,896 mm inside), 5 across (2,350 mm) and 4 high (2,393 mm), 180 in all. Turning some of them to fill the gap along the side often fits more; the calculator tries every way of turning them and draws the layout.

How many cartons fit in a 40ft container?

With the same 60 × 40 × 50 cm cartons stacked the same way, a 40ft standard takes 20 × 5 × 4 = 400 and a 40ft high cube, 2,697 mm tall inside, takes 20 × 5 × 5 = 500: its extra 30 cm of height adds a layer. Enter your own carton to see the count for all three containers, with turned cartons filling the gaps.

What are the inside dimensions of a 20ft and 40ft container?

By Maersk's specifications, a 20ft standard is 5,896 × 2,350 × 2,393 mm inside (33.2 m³), a 40ft standard 12,032 × 2,350 × 2,393 mm inside (67.7 m³) and a 40ft high cube 12,032 × 2,350 × 2,697 mm inside (76.3 m³). The door is a little smaller than the inside: 2,350 × 2,274 mm on a 20ft. Containers from other lines differ by a few centimetres.

How much weight can a container carry?

Maersk gives a maximum payload of 28,200 kg for a 20ft standard, 28,800 kg for a 40ft standard and 28,620 kg for a 40ft high cube. Road limits at either end are often lower, so ask your forwarder before loading heavy goods. The calculator checks the payload and tells you when weight, not space, is the limit.

Why do fewer cartons fit than the volume suggests?

Because cartons are rigid boxes: whatever is left at the end of each row, along the side and under the roof is too small for another carton. Stacked the same way, 180 cartons of 60 × 40 × 50 cm fill 21.6 m³, about 65% of the 33.2 m³ inside a 20ft. Turning some of them into the gaps fits more, and carton sizes that divide the container well fill more still.

Can cartons be loaded on their side?

Only if the goods and the cartons allow it. A corrugated carton is strongest standing upright, and many are marked "this side up". The calculator keeps cartons upright unless you untick that option; it then also tries laying them on their sides, which sometimes fits more.

Missing something?

Tell us what would make this calculator more useful, such as pallets, mixed carton sizes or other containers, or what else you need when you ship from Asia.

We read every message and use your email only to reply. Privacy notice